Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
This item does not fit your vehicle
2020 Chrysler Pacifica
These items fit your vehicle
2020 Chrysler Pacifica
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Say goodbye to unsightly hitches with this trailer's concealed cross-tube design, which keeps it barely noticeable when not in use. Its custom fit is specifically tailored for your vehicle, ensuring it lines up perfectly with existing frame holes. Enjoy both functionality and aesthetics with a class IV hitch that integrates seamlessly into your vehicle’s rear profile.
Ready to take on the big jobs, this trailer hitch boasts impressive weight capacities. You can tow up to 8,000 pounds with ease and even up to 10,000 pounds when using a weight distribution system. Its robust design also supports up to 800 pounds of tongue weight, giving you the confidence to haul trailers or carriers safely without second-guessing your hitch's limits.
Protecting against the elements is crucial for any trailer hitch, and this one does it best with its gloss black powder coat finish over a protective base coat. This durable coating not only adds a sleek look but also provides superior rust resistance, ensuring long-lasting performance against harsh weather conditions and road salt.
Installation woes are a thing of the past thanks to the hitch’s bolt-on design. Each kit comes complete with all necessary hardware and instructions, allowing for a straightforward installation process without needing any welding or major vehicle modifications. Just bolt it on and you’re ready to tow, making DIY installation both feasible and stress-free.
Experience unparalleled strength and a precise fit thanks to the precision robotic welding used in crafting this hitch. This manufacturing process enhances the hitch's structural integrity, ensuring it handles your towing tasks with significant reliability and offering you peace of mind when on the road.
Feel proud towing with a hitch that’s made in the USA. This speaks volumes about the quality and craftsmanship that goes into each unit, offering not only a sense of national pride but also assurance in its reliability and durability. Trust in its American-made quality every time you tow.
FAR exceeds expectations--is what I'd write about eTrailer.com
It began with my purchase of a new Ford Transit 250 cargo van, which came without a trailer hitch. Even though my wife and I do not (yet) own an RV, we intend to purchase one--and will of course need a trailer hitch--as we approach 'retirement.'
I mentioned all this in passing to a friend,. who asked if I'd heard of eTrailer.com.
Went to their website, entered my vehicle information and was very pleasantly surprised at what was available for my new van.
I chose a Class 4 hitch, with a towing capacity of 10,000 pounds. It was delivered via UPS (with free shipping) and arrived three days BEFORE eTrailer said to expect the package.
Installation went extremely smoothly, thanks to clear instructions, website photos/videos and also a product that fit my van's undercarriage frame perfectly.
I will definitely use eTrailer again for future accessories like the wiring harness and other items. They've also got EXCELLENT customer service.
Great job, eTrailer!
Install was not easy. I used a bottle jack and brute strength to fit it perfectly. Install time 2hrs. 1/2” drill bit works just as well instead of 9/16” bit.
Kate F.
10/8/2025
Install looks great Christopher! What do you mainly use your hitch for?
I'm not a pro, but I've installed 4-5 of these on different cars. This one went on my 2024 Transit 350 Cargo and was quite a bit more difficult. Like other reviewers it didn't fit between the frame rails easily and the holes didn't line up well. After installing the two forward most bolts, I was able to swing it up into position and then used a floor jack and a bottle jack, plus some careful jumping on the bed, to get it into place. I used some C-clamps to get the forward holes to line up. The aft most holes didn't line up - lesson learned, you can just drill these once it is in place with a 1/2" drill (not the 9/16" called for in the directions).
The best thing about this hitch is that it is concealed. You don't see the crossbar like other hitches. You just see the receiver below the bumper. It would get 5 stars if Curt the manufacturer had factored in the 2 ply reinforcement on the Ford Transit's frame. This required squeezing the hitch within the frame with a dead blow hammer and a jack. Then you just enlarge an existing hole and drill another hole, using a step bit and cutting oil. THANK YOU E.TRAILER. Your videos prepared me for all this, making it easier. Etrailer's prices are competitive with other vendors. There is a rare chance you might find it slightly cheaper from someone else, but I would be happy to pay a little extra and get it from Etrailer because of all their excellent support and videos.
Went in like clock work!!! Thanks for sending the carriage bolt Fish cables !!
Trailer hitch fit my transit 350 perfectly. The instructions were helpful and accurate. Good experience all around!
It was hard to install the hitch. I contacted etrailer and got recommendation to use some more force to install the hitch. With the jack I was able to push the hitch into position. Now it won't move anymore, and I like how it is installed
Jenny N.
3/9/2022
It sounds like that the side brackets were knocked out of alignment which can happen while in transit to our facility or to you. We do have a FAQ that can assist with moving the side brackets of the hitch back into alignment to allow for installation.
Helpful Links
Hythload
3/1/2023
Weve been using the hitch frequently for towing boats and bringing our bikes. Works nicely.
Trailer hitch is excellent
Good hitch, not so good install. Installed on 2019 Ford Transit. Hitch is rated for more than Ford's towing weight spec's. But I like to go a bit bigger when possible. The four horizontal bolts and the two passenger side vertical bolts lined up perfect. The two vertical bolts on the driver side did not line up well. The rear vehicle favored bolt hole needed to be enlarged on the hitch and truck to line up. This required putting the hitch up and down checking bolt fit. This was not easy since the spacial sizing of the hitch is a bit off. The side to side dimension of the hitch is about 1/8" too wide to fit between the frame rails of the truck. 1/8" is not much, but with tolerances between steel on steel it makes a big difference. It's easy to see what is wrong. The frame rails have an extra reinforcement metal wrap on a portion of the passengers side. Due mostly to the factory tow hook mount (tow hook needs to be removed and is not stated in instructions - reinforcement mount cannot be removed). A measurement between the rails not including the reinforcement area would match the hitch dimensions. A measurement between the rails including the reinforcement would be 1/8" or so less. Perhaps Curt engineers did not account for the reinforcement. The attached pictures show a single layer frame rail on the drivers side and a triple layer reinforced frame rail portion on the passenger side. This required me to use a hydraulic floor jack to press fit the hitch into place. This coupled with the misaligned bolt holes made for unnecessary complexity. Removing the hitch to enlarge holes required bar leveraging to squeeze the hitch back down, then jack back into place check alignment, than leverage down, drill, repeat. Again, good hitch, not so good engineering.
The hitch was a little bit more work than normal to install, but nothing that average Joe can't handle. That said 4 hands would make it much better. I use my hitch for motorcycle le carriers. We have done a out 3000 Miles with 2 bikes on the hitch(about 500lbs) with the rack included and it's leveraged 4' out and have no issues at all. Great hitch
Do not buy. Not even close to fitting. Does not fit between a 2021 Ford Transit 250 frame rails. And the holes on the tabs were 5/8" from aligning with the frame holes. Also if I drilled out the tabs to make it fit, there would only be 1/4" of material left on the tab. Am returning mine. Upsetting.
Sierra K.
11/24/2021
From your photo, it looks like you have a cutaway model or cab and chassis which this hitch does not fit.
One of the more difficult trailer hitch installs I've done. Barely fit between the frame rails had to use a jack and the full weight of the vehicle to get it to actually fit & all but one of the holes on the tabs that bolt to the bottom of the frame lined up, had to drill one out. In the end I got it on there, but it certainly wasn't an easy install. If there was just a little more play in the bolt holes it would have been much easier.
Product is solid, directions were fairly clear (had to deviate a little for a whole that was not exactly as described), and the whole purchase to delivery was painless.
Thanks eTrailer!
Benjamin H.
9/22/2019
Great!
bolted on as described
I was skeptical at first because I was looking around and there was no one that had a trailer hitch that match my van. I found this company online and they said it will fit guaranteed so I purchased a hitch before I bought any of the other accessories needed the harnesses and everything just to make sure and within 30 minutes I had to hitch up done and installed
This is a ford transit 350 HD
Best customer service to find the right fit for my truck.
Purchased hitch for a special project. Worked out perfectly!!! Thanks etrailer!!!
yes its a bit tight going in but manageable with a jack and soft blow hammet
Never worked so hard to install a hitch as I did this one. First, I literally waited MONTHS for it to be built and shipped. It fit so tight between the frame rail that I had to beat it into place with a sledge hammer. Lastly had to drill a hole on the passenger side 1.5 inches from where the recovery hook had been bolted. Curt could have utilized that hole just by moving the tab a little bit. On the driver side the provided bolt was just a smidge too long due to the way ford build the frame rail/bumper mount. Had to modify the bolt so it could drop in the hole.
Supper fast shipping and great price
Good Hitch, except on a 2018 350 xlt with the rear step bumper, the width is a slight bit too wide considering the bumper brakets also being attached to the rear tube frame. Actually, No amount of sledge hammering would cause the hitch to slide in between the two frame members. I had to actually jack the hitch up and the weight of the van forced the hitch inbetween the tube members. it had to be lined up perfectly before this otherwise the bolt holes wouldn't line up and the whole installation was screwed because there was no amount of sledge hamering that would budge the hitch. Also some of the holes were too small for the bolts and had to be drilled out. This all should have been in the instructions, but was not. The 30 min. installation took 3 hours.
Jenny N.
10/7/2022
The installation is more involved install. I recommend watching the video that we have on a 2019 Ford Transit T350.
I was surprised at how easy the installation was on my 2018 Ford Transit. I did not experience any of the alignment difficulties I had read about in various reviews. After several trips towing my car trailer (approx. 5200lb gross weight) including a cross country and back trip there have been no problems with the Curt Trailer Hitch.
Chris
11/6/2023
No problems. Very pleased with the Curt trailer hitch.
The package arrived within the expected time frame. The box was slightly damaged but the hitch appears fine. All the bolts etc was present. Something I did not anticipate is the weight of the hitch and lifting it in place while bolting as well as the need for a torque wrench. After some consideration I decided to have a mechanic instal the hitch for me. Hopefully he can do it in one hour of shop time. If I had a lift and a helper I'm sure I could do it in an hour or less.
Jim
3/12/2020
Used the hitch to hold a heavy duty bike rack on a 6000 mile trip. No issues. I dont anticipate any problems. The hitch feels like it is part of the trucks frame. The vehicle is a Ford Transit 350 converted to a camper. The cost to have a pro instal the hitch was $100. That did not include wiring for a trailer. Estimate on a pro wiring job is another $100.
I have installed many hitches and this one was rated as easy. It did not fit well between the frame rails and I had to use a hydraulic jack on both sides to allow weight of van to push into place. The end product is acceptable but not made to fit 2020 Transit.
Katrina B.
3/28/2022
This hitch is a confirmed fit for your 2020 Ford Transit T250. But please note that the hitch will not fit a cab and chassis or cutaway models.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gary G.
9/16/2025
This trailer hitch and matching wiring harness, that I subsequently purchased from eTrailer have worked perfectly in the past year of use. Great job, excellent products, great ion and customer service. Thanks, eTrailerIm a customer for life!